orange juice processing line,lemon juice processing machine
orange juice processing line,lemon juice processing machine
orange juice processing line,lemon juice processing machine
orange juice processing line,lemon juice processing machine
orange juice processing line,lemon juice processing machine
orange juice processing line,lemon juice processing machine
orange juice processing line,lemon juice processing machine
  • orange juice processing line,lemon juice processing machine
  • orange juice processing line,lemon juice processing machine
  • orange juice processing line,lemon juice processing machine
  • orange juice processing line,lemon juice processing machine
  • orange juice processing line,lemon juice processing machine
  • orange juice processing line,lemon juice processing machine
  • orange juice processing line,lemon juice processing machine

Citrus juice processing line

Processing citrus fruits differs a lot from processing other kinds of fruits,as the citrus fruits have peels and seeds,if we direct mill the citrus and extract juice from the mash,the citrus peels and seeds in juice will influence the end products taste.Due to this feature,we designed the citrus extractor that is especially for citrus fruits,and the extractor can separate the peels,seeds,pulp and juice.The citrus fruits go through extractors,juice and pulp as the main products to make into drinkable juice,whereas citrus peels and seeds as the by-products can be dewatered via belt press extractor and the final products can be as animals feed.

Before citrus juice extracting,we use the citrus oil extractor togrind citrus oil from citrus peel.Depending on the variety of citrus,0.5-2% oil will be existed in the citrus oil wash water,through three-phase disk stack centrifuge separator concentration and purification,the pure essential citrus oil is recovered.The citrus processing line offers turnkey solutions for clients include citrus juice production,citrus oil recovery,citrus peel and seeds deep processing,With this method,fruit juice producers can considerably enhance the resource utilization and cost-effectiveness of the entire system.


Wide range of raw materials, this production line is suitable for all kinds of citrus fruits with the same characteristics, such as orange, lemon, orange, Huyou, grapefruit, etc;

  • The entire production line can also deal with the same characteristics of the fruit, such as orange, lemon, etc..

  • 3 models of the juice extractor can be choosed.

  • According to the needs of customers can determine whether the need to separate the essential oil   system.

  • The final product can ensure the original nutrition and flavor.

  • The advanced enzymatic hydrolysis separation system ensures the product quality and yield.

  • According to the requirements of customers can choose to focus on the import and domestic.

  • Full use of man-machine interface control, the production process is intuitive and easy control and operation, high automation, reduce labor costs.

  • The whole production line includes automatic cleaning system.


Raw material Fresh orange, lemon,etc
Finished productConcentrated Juice, NFC Fresh Nature Juice,Oil,Orange pulp
Processing capacityFrom 20tons/day to 2000 tons/day
Efficient input45% raw fruit (55% as waste, peels and seeds)
Fruit consistence7—12 Brix
End packageAseptic bag/tin can/glass bottle/PET bottle
OutputCan be calculated





1.Oranges are harvested from large groves. Some citrus growers are members of cooperative packing and marketing associations, while others are independent growers. When the mature fruit is ready to pick, a crew of pickers is sent in to pull the fruit off the trees. The collected fruit is sent to packing centers where it is boxed for sale as whole fruit, or sent to plants for juice processing. The oranges are generally shipped via truck to juice extraction facilities, where they are unloaded by a gravity feed onto a conveyor belt that transports the fruit to a storage bin.



2.The fruit must be inspected and graded before it can be used. An inspector takes a 39.7 lb (18 kg) sample to analyze in order to make sure the fruit meets maturity requirements for processing. The certified fruit is then transported along a conveyor belt where it is washed with a detergent as it passes over roller brushes. This process removes debris and dirt and reduces the number of microbes. The fruit is rinsed and dried. Graders remove bad fruit as it passes over the rollers and the remaining quality pieces are automatically segregated by size prior to extraction. Proper size is critical for the extraction process.

Citrus oil extracting machine
The citrus oil extracting machines is specailly designed for grinding and extracting oil from citrus peel.The machine is made of sus304 material and with a high oil yield rate,the capacity for the citrus oil extractor is from 2-10 tons available.



3. Proper juice extraction is important to optimize the efficiency of the juice production process as well as the quality of the finished drink. The latter is true because oranges have thick peels, which contain bitter resins that must be carefully separated to avoid tainting the sweeter juice. There are two automated extraction methods commonly used by the industry. The first places the fruit between two metal cups with sharpened metal tubes at their base. The upper cup descends and the fingers on each cup mesh to express the juice as the tubes cut holes in the top and bottom of the fruit. The fruit solids are compressed into the bottom tube between the two plugs of peel while the juice is forced out through perforations in the tube wall. At the same time, a water spray washes away the oil from the peel. This oil is reclaimed for later use.

The second type of extraction has the oranges cut in half before the juice is removed. The fruits are sliced as they pass by a stationary knife and the halves are then picked up by rubber suction cups and moved against plastic serrated reamers. The rotating reamers express the juice as the orange halves travel around the conveyor line.

When the mature fruit is ready to pick, a crew of pickers pull the fruit off the trees. Once collected, the fruit is sent to plants for juice processing. Before extraction, the fruit is cleaned and graded.

Some of the peel oil may be removed prior to extraction by needles which prick the skin, thereby releasing the oil which is washed away. Modern extraction equipment of this type can slice, ream, and eject a peel in about 3 seconds.


Citrus peel oil recovery system

The citrus oil recovery system needs two stage separating,the first separator is mainly for oil concentration,and the second stack centrifuge separator is for oil purification.
The first stage removes most of the water and insoluble solids from the emulsion.This stage may involve more than one desludging centrifuge,depending upon the volume being
processed.The oil-rich emulsion(cream)production by this centrifuge should have an oil ranging between 65% to 85%(and preferably>75% for best results).This oil-rich cream becomes the feedstock for the second stage polishing centrifuge.The second stage polishing centrifuge is where the remaining water and some cloudy particles are removed.The oil discharged from this stage is the fine essential oil that can be ready for storage.


4.The extracted juice is filtered through a stainless steel screen before it is ready for the next stage. At this point, the juice can be chilled or concentrated if it is intended for a reconstituted beverage. If a NFC type, it may be pasteurized.



5.Concentrated juice extract is approximately five times more concentrated than squeezed juice. Diluted with water, it is used to make frozen juice and many RTD beverages. Concentration is useful because it extends the shelf life of the juice and makes storage and shipping more economical. Juice is commonly concentrated with a piece of equipment known as a Thermally Accelerated Short-Time Evaporator, or TASTE for short. TASTE uses steam to heat the juice under vacuum and force water to be evaporated. Concentrated juice is discharged to a vacuum flash cooler, which reduces the product temperature to about 55.4° F (13° C). A newer concentration process requires minimal heat treatment and is used commercially in Japan. The pulp is separated from the juice by ultra-filtration and pasteurized. The clarified juice containing the volatile flavorings is concentrated at 50° F (10° C) by reverse osmosis and the concentrate and the pulp are recombined to produce the appropriate juice concentration. The flavor of this concentrate has been judged to be superior to what is commercially available in the United States and is close to fresh juice. Juice concentrate is then stored in refrigerated stainless steel bulk tanks until is ready to be packaged or reconstituted.



6.When the juice processor is ready to prepare a commercial package for retail sale, concentrate is pulled from several storage batches and blended with water to achieve the desired sugar to acid ratio, color, and flavor. This step must be carefully controlled because during the concentration process much of the juice's flavor may be lost. Proper blending of juice concentrate and other flavor fractions is necessary to ensure the final juice product achieves a high quality flavor.



7.Thanks to its low pH (about 4), orange juice has some natural protection from bacteria, yeast, and mold growth. However, pasteurization is still required to further retard spoilage. Pasteurization also inactivates certain enzymes which cause the pulp to separate from the juice, resulting in an aesthetically undesirably beverage. This enzyme related clarification is one of the reasons why fresh squeezed juice has a shelf life of only a few hours. Flash pasteurization minimizes flavor changes from heat treatment and is recommended for premium quality products. Several pasteurization methods are commercially used. One common method passes juice through a tube next to a plate heat exchanger, so the juice is heated without direct contact with the heating surface. Another method uses hot, pasteurized juice to preheat incoming unpasteurized juice. The preheated juice is further heated with steam or hot water to the pasteurization temperature. Typically, reaching a temperature of 185-201.2° F (85-94° C) for about 30 seconds is adequate to reduce the microbe count and prepare the juice for filling.



8 .To ensure sterility, the pasteurized juice should be filled while still hot. Where possible, metal or glass bottles and cans can be preheated. Packaging which can not withstand high temperatures (e.g., aseptic, multilayer plastic juice boxes which don't require refrigeration) must be filled in a sterile environment. Instead of heat, hydrogen peroxide or another approved sterilizing agent may be used prior to filling. In any case, the empty packages are fed down a conveyor belt to liquid filling machinery, which is fed juice from bulk storage tanks. The filling head meters the precise amount of product into the container, and depending on the design of the package, it may immediately invert to sterilize the lid. After filling, the containers are cooled as fast as possible. Orange juice packaged in this manner has a shelf life of 6-8 months at room temperature.


send inquiry to us

Related Product

Chat with us